Turner – 2nd Year Mock Test – NSQF – Module Turning with Lathe Attachments – 2. Different types of Attachments

by
 0%

Question 1 of 37

What is the advantage of follower steady rest over fixed steady rest? | फिक्स्ड स्टेडी रेस्ट की तुलना में फॉलोअर स्टेडी रेस्ट का क्या लाभ है?

Rate this question:

Question 1 of 37

Question 2 of 37

What is the form of NO GO anvil of caliper gauge with roller type? | रोलर टाइप के कैलिपर गेज के NO GO एनविल का क्या रूप है?

Rate this question:

Question 2 of 37

Question 3 of 37

What is the name of gauge? | गेज का क्या नाम है?

Rate this question:

Question 3 of 37

Question 4 of 37

What is the name of lathe attachment? | इस लेथ अटैचमेंट का क्या नाम है?

Rate this question:

Question 4 of 37

Question 5 of 37

What is the use of roller steady rest?

Rate this question:

Question 5 of 37

Question 6 of 37

What is the name of process? | इस प्रक्रिया का नाम क्या है?

Rate this question:

Question 6 of 37

Question 7 of 37

Which gauge is generally used to check internal threads? | आंतरिक थ्रेड्स की जांच के लिए आमतौर पर किस गेज का उपयोग किया जाता है?

Rate this question:

Question 7 of 37

Question 8 of 37

Where is the fixed steady rest clamped on a lathe? / लेथ पर फिक्स्ड स्टेडी रेस्ट कहाँ लगाया जाता है?

Rate this question:

Question 8 of 37

Question 9 of 37

What is the type of checking? | यह किस प्रकार की जाँच है?

Rate this question:

Question 9 of 37

Question 10 of 37

What is the name of device? | इस युक्ति का क्या नाम है?

Rate this question:

Question 10 of 37

Question 11 of 37

Which part is marked as 'X' in copying attachment? | कॉपीइंग अटैचमेंट में 'X' चिह्नित भाग क्या है?

Rate this question:

Question 11 of 37

Question 12 of 37

How many adjusting bearing pads in fixed steady rest? | फिक्स्ड स्टेडी रेस्ट में कितने एडजस्टिंग बेयरिंग पैड होते हैं?

Rate this question:

Question 12 of 37

Question 13 of 37

What is the name of attachment? | इस अटैचमेंट का नाम क्या है?

Rate this question:

Question 13 of 37

Question 14 of 37

Where is the milling attachment mounted in centre lathe? | सेंटर लेथ में मिलिंग अटैचमेंट कहाँ लगाया जाता है?

Rate this question:

Question 14 of 37

Question 15 of 37

What is the type of measurement? | यह किस प्रकार का माप है?

Rate this question:

Question 15 of 37

Question 16 of 37

How is the minor diameter of external thread checked generally? / बाहरी थ्रेड के छोटे व्यास की जाँच आमतौर पर कैसे की जाती है?

Rate this question:

Question 16 of 37

Question 17 of 37

How many standard wires are used to check effective diameter very accurately? | प्रभावी व्यास की बहुत सटीक जांच के लिए कितने मानक तारों का उपयोग किया जाता है?

Rate this question:

Question 17 of 37

Question 18 of 37

What is the name of attachment? | इस अटैचमेंट का नाम क्या है?

Rate this question:

Question 18 of 37

Question 19 of 37

Which part is marked as 'X' in copying attachment? | कॉपीइंग अटैचमेंट में 'X' चिह्नित भाग क्या है?

Rate this question:

Question 19 of 37

Question 20 of 37

What is the name of part marked as 'X'? | 'X' से चिह्नित भाग का क्या नाम है?

Rate this question:

Question 20 of 37

Question 21 of 37

What is the purpose of locking screw marked as 'x' in steady rest? | स्टेडी रेस्ट में 'x' से मार्क्ड लॉकिंग स्क्रू का क्या उद्देश्य है?

Rate this question:

Question 21 of 37

Question 22 of 37

What measurement is checked? / कौन सा माप जाँचा जाता है?

Rate this question:

Question 22 of 37

Question 23 of 37

What is the name of attachment? | इस अटैचमेंट का नाम क्या है?

Rate this question:

Question 23 of 37

Question 24 of 37

Which formula is used to find core diameter? / कोर व्यास निकालने के लिए कौन सा फॉर्मूला प्रयोग किया जाता है?

Rate this question:

Question 24 of 37

Question 25 of 37

What is the disadvantage of fixed steady rest over follower steady rest?

Rate this question:

Question 25 of 37

Question 26 of 37

What is the name of operation? | इस ऑपरेशन का क्या नाम है?

Rate this question:

Question 26 of 37

Question 27 of 37

What does M20 stands for? | M20 का मतलब क्या है?

Rate this question:

Question 27 of 37

Question 28 of 37

Where is the grinding attachment mounted in centre lathe? | सेंटर लेथ में ग्राइंडिंग अटैचमेंट कहाँ लगाया जाता है?

Rate this question:

Question 28 of 37

Question 29 of 37

What is the advantage of roller steady rest over fixed rest?

Rate this question:

Question 29 of 37

Question 30 of 37

Calculate the minor diameter of M20 × 2.5 pitch thread? / M20 × 2.5 पिच थ्रेड के छोटे व्यास की गणना करें?

Rate this question:

Question 30 of 37

Question 31 of 37

What is the name of part marked as 'X' in thread measurement? | थ्रेड मापन में 'X' से चिह्नित भाग का क्या नाम है?

Rate this question:

Question 31 of 37

Question 32 of 37

What is the name of gauge? | गेज का क्या नाम है?

Rate this question:

Question 32 of 37

Question 33 of 37

Which method is suitable for measuring minor diameter of internal thread? / आंतरिक थ्रेड के छोटे व्यास को मापने के लिए कौन सी विधि उपयुक्त है?

Rate this question:

Question 33 of 37

Question 34 of 37

What is the formula for metric thread depth? | मेट्रिक थ्रेड डेप्थ का फॉर्मूला क्या है?

Rate this question:

Question 34 of 37

Question 35 of 37

What is the name of gauge? | गेज का क्या नाम है?

Rate this question:

Question 35 of 37

Question 36 of 37

What is the name of operation? | इस ऑपरेशन को क्या कहते हैं?

Rate this question:

Question 36 of 37

Question 37 of 37

Which part is marked as 'X' in copying attachment? | कॉपीइंग अटैचमेंट में 'X' चिह्नित भाग क्या है?

Rate this question:

Question 37 of 37


 

Leave a Comment

Translate »
error: Content is protected !!